Available Industrial Property (NC002347)

1998 / 0

Excellent

3,192 SF
3,192 square feet of office space as an attachment to Building A with 4 private offices, a conference room, a supply / mail room, a break room, men's and women's restrooms and a lobby and reception area. Interior finishes include painted gypsum wall panels, tiled and carpeted floors, dropped acoustical ceiling tiles and recessed fluorescent light fixtures.

255' x 272', 355' x 122', 47' x 298'

Min: 18', Max: 36' 3"

Bldg A: 25'9" at the eaves and 36'3" at the centerBldg B: 20' at the eaves and 23' at the centerBldg C: 18' at the eaves and 34' at the center

30' x 108'

10" steel HBldg A: 30' x 1 at 100' - 12" steel H columns1 at 108'1 at 47'Bldg B: 47' x 30' - Clear span columnsBldg C: 30' x 2 at 100' - 8" steel H1 at 108'1 at 47'

Steel H

Building A is a standing seam metal roof system and Buildings B and C are 24 gauge Butler Rib II pre-engineered metal panels.

6" Reinforced Concrete - Building A and a portion of Building B (2904 square feet) has 6" concrete floor slabs reinforced with 6x6-1.4x1.4 wwm at 3,000 psi, The remainder of Building B (11,102 square feet) (heat-treat) and Building C have 6" concrete floor slabs reinforced with 6x6-2.9x2.9 wwf. There are 3-8" concrete recessed floor slab pits with rebar in Building B and Building C.

Building A has Butler Rib II pre-engineered metal panels with 3" exposed vinyl backed insulation. Buildings B and C are uninsulated Butler Rib II pre-engineered metal panels with a 2' concrete foundation. Translucent panels to augment lighting are in all wall sections.

30 foot candle metal halide light fixtures.

Bldg A: 2- 9' x 10' dock height overhead rollup doors with dock seals, bumper pads and load levelers.1-14' x 16' drive in door1-8' x 8' rollup door Bldg C: 1-12' x 16' drive in door 1-14' x 16' drive in door

27 paved, marked and lighted spaces and graveled parking for an additional 50 cars.

No - Not available

NC Natural Gas 6" main, 4" line

City

City

Progress Energy
23,000 volts primary

Combo

No

No

Wall Mount - Wall mounted louvered centrifugal fans throughout the plant areas.

3-Gardner Denver compressorsAir lines throughout.There is a BAC cooling tower located on site for process cooling only.

EXPANSION: 75,000 square foot pre-graded pad and addition could be added along the southeast wall.4,000 square foot pre-engineered building with vinyl backed insulation in the walls and roof (50' x 80') with 17' clear ceiling heights waste water pre-treatment facility. There is one drive in door serving this building.2 pre-engineered buildings outside of Building B (20' x 16') and Building C (20' x 32') used to house switchgear and air compressors.

SQUARE FOOTAGE BY FLOORS: Bldg A: 69,360 square feet (255' x 272')Bldg B: 14,006 square feet (47' x 298')Bldg C: 43,310 square feet (355' x 122')Office: 3,192 square feet (84' x 38') DIMENSIONS: Bldg A: 255' x 272' Bldg B: 47' x 298'Bldg C: 355' x 122'Office: 84' x 38'ENVIRONMENTAL: Hobbs and Upchurch Engineers have completed both Phase I and Phase II environmental site assessments noting that zinc and lead are present on site above state required levels.

Manufactured wire for industrial staples and stitching wire supplying printing companies and binderies.