Sold Industrial Property (SC001069)

1986 / 1992
1986: 68,000 square feet
1989: 23,500 square feet
1992: 4,277 square feet

Excellent

9,175 SF
9,175 square feet of good general purpose manufacturing office space and cafeteria featuring carpet and tile floors, sheetrock and acoustical tile with modern fluorescent lighting. 3,035 square feet of mezzanine plant support offices and quality control lab space not counted in overall square footage.

241' x 331'

Min: 24' 2", Max: 24' 2"

40' x 40'

8"

Steel H

Built-up - Built up roof (orginal roof with annual maintenance)

6" Reinforced Concrete

Metal -- insulated

400 watt high pressure sodium vapor

North Wall
1-10’ x 14’ rapid roll up drive-in door.

Covered platform with 8 positions accessed by 1 – 10’ x 12’ rapid roll door. 5 positions with load levelers and 3 without.

1 drive up ramp to access truck court.

South Wall
1-10’ x 14’ rapid rollup drive-in door.
1-10’ x 16’ rapid rollup drive-in door.

Covered platform with 8 positions accessed by
2 – 10’ x 10’ rapid roll door. 5 positions with load levelers and 3 without.

1 drive up ramp to access truck court.

1-5 ton with 2 – 2.5 ton electric pulleys with 16’ clear under hook, 45’ span and 60’ travel.

344 paved, marked and lighted spaces

No

SC Electric & Gas - 6" main, 2" line

City

City

Progress Energy
Primary: 23 kv, 3 phase line

Secondary: 3 – 3,000 amp Square D switchgear.
Transformers: 1-2,500 kva pad mounted transformer

Distribution: 3-800 amp bus duct

Gas
Combination gas fired unit heaters for heating

Yes - Combination gas fired unit heaters for heating and cooling

Yes - 100% wet/dry system for covered loading areas

2 – 400 hp Ingersoll Rand air compressors, one at 1476 cfm installed in 1990 and one at 1500 cfm installed in 1982.

2 – Ingersoll Rand air dryers

1 – Accumulation tank

2 – Vacuum pumps

Air lines throughout the facility

240 ton 4 stage chiller for process cooling installed in 1999.

Fire pump house which houses back up diesel fire pump.

Fencing along the sides and rear of the facility. There is a guard gate for truck access. Employees access the facility via ID cards.

Assembly of master cylinders for brakes for passenger cars and light trucks.